High Accuracy Robotic Automatic Glue / Adhesive Dispensing Machine 12VDC / 24VDC VS-983 manufacturer from China Dongguan Vision Plastic Metal Products Company

High Accuracy Robotic Automatic Glue / Adhesive Dispensing Machine 12VDC / 24VDC

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: VS-983

High Accuracy Robotic Automatic Glue / Adhesive Dispensing Machine 12VDC

High Accuracy Robotic Automatic Glue / Adhesive Dispensing Machine 12VDC / 24VDC

Specifications:

	Dimensions	: 235mmx225mmx60mm
	Spit mode:	16 kinds of free-setting mode, time display with spit
	Power supply	: AC 220V ± 10% / 50Hz AC 110V ± 10% / 60Hz (can be internal conversion)
	Internal voltage	: 12VDC/24VDC
	Power consumption	<8W
	Input pressure / output pressure	10-100PSI / 1-80PSI
	Air source	Maximum 0.99MPa (clean dry air without lubrication)
	Out pressure adjustment range	0.05MPa - 0.99MPa
	Clock out time	00.01-99 .99 S
	Artificial time out	Sustainable spit coating, crossed
	Out interval adjusttment	0.1-9 .9 S (automatic timing function)
Support Ad files	Vacuum function	adjustable to 600 mm Hg negative pressure control
	Repeatability and out Frequency	Accuracy: +0.01% Frequency:> 800 beats / min
	Minimum discharge rate	0.001ml
OSD Language	English

Description:

1	Power: lighten-on, extinguish-off
2	Dispalyer for spit timing, showing time setting
3	Adjuster for input air pressure, pull out first, then air pressure up when clockwiseswitching, air pressure down when anti-clock switching
4	Air pressure displayer: 0~100pSi
5	Vacuum controler: Vacuum Withdrawing up when anti-clock switching, Vacuum Withdrawing down when clockwise switching
6	test button: it can replace the footswitch when testing
7	Spit time DIP button: show the time has set, using plus &subtract way 00.01second ~99.99 second
8	Interval DIP button: show the time has set, using plus &subtract way 0.1second ~9.9 second (timing automatically)
9	Spit outlet: connect spit needle
10	Air pressure input port: connect the high pressure air source
11	Programming unit for spiting way: 16 kinds flexible setting
12	Footswitch controller port: connect the footswitch switcher
13	Power input outlet
14	Insurance outlet

Instruction and installation

1.Installation

Fully-automatic Epoxy Injection Machine

2.Setting the way

Fully-automatic Epoxy Injection Machine

Attention and maintenance

1, Air pressure cant be more than 7bar(10psi), working air pressure cant be more than5.5bar (78psi), if the working air pressurer is more than 4 bar, pls use the original partsfrom the manufacter.

2, The liquid material must be stired evenly before putting to the cylinger needle. It will be better if the liquid material can be stored at the stable temperature of 5 degree centigradeto make sure there is no big change in the density of the liquid material. If the density ofthe liquid is so high, ( it means the liquid is so viscous, it may be hard to spit out). If theliquid need to be diluted, pls compliant to the instruction of the liquid material manufacture.

3, Don’t sharply increase the Vacuum, otherwise, the liquid will be pulled in the catheterby the vacuum. The qty of the vacuum pump back rely on the air pressure level, workingcycle, qty of the liquid to spit. If the qty of the vacuum is too much, the piston will beoverset, disturbing the normal work

4, Avoid to overset the liquid cylinder, otherwise, the liquid will flow to the air cylinderto destroy the internal aprt.

5, Pls clear the stuff left in the cylinder needel when needed. Otherwise the stuff willbecome hard, then disturbing the vacuum pumpback and stop the cylinder needle.

6, After using the machine, the cylinder needle need to be cleaned every time, otherwise,it is difficult to unload the needle when the liquid becomes hard. Normally, it is easy toremove the liquid from the inside of the cylinder needle, just dipping the parts in the handwater for 5~10minutes, all the part will be cleaned.

7, Pls disposal the used needle and cylinder needle at appropriate place to avoide somei nappropriate liquid pollution

Applications:

The electric apparatus of the car, packaging, household appliances, the bearing,
Circuit board, electronic element, the camera, medicine,
The package of the electric apparatus, the condenser, the production process is dealt with, the instrument,
Jewel, the relay, quartz crystal, integrated circuit,
Lamp decoration, the apparatus of radio, electric wire connector